Sale!

Makita DTD154Z 18V LXT Li-ion Brushless Impact Driver Body Only

10,980.82

The Makita DTD154Z brushless impact driver is lightweight, compact, packed full of features and perfect for the professional. Makita DTD154 Brushless Impact Driver easily copes with harsh working environments. With an efficient brushless motor that increases battery run time by around 30% and needs virtually no maintenance, this unit will give many years of trouble free use.

In stock

Description

Makita DTD154Z 18V LXT Li-ion Brushless Impact Driver

The Makita DTD154 Brushless Impact Driver easily copes with harsh working environments. The outer case is dust and drip-proof, making it a good choice for the outdoor site and construction work. The Makita DTD154Z 18V Lithium-ion cordless brushless impact driver is ideal for use in outdoor or harsh environments for professionals.

The compact & lightweight 1.5kg plan of the DTD154 makes transportation around the worksite simple without compromising on control, while the updated belt clip. It will drive standard bolts from M5 to M14 and machine screws from M4 to M8. The brushless engine disposes of carbon brushes, empowering the engine to run cooler and more productively for longer life. It has an electronic 3 stage impact power selector + TEK mode selection which prevents over tightening of fasteners.

 

  • One-touch sliding chuck for easy bit installation and removal
  • TEK mode (T-mode) reduces impact power during final stages of fastener seating
  • Brushless DC motor with high power to weight and size ratio.
  • Super compact with an overall length of only 117mm
  • Voltage: 18v
  • Max Torque (Nm): 175
  • Brake Type: Electric

 

specification

  • Voltage: 18V
  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M14
  • Coarse thread (length): 22 – 125 mm
  • Max Fastening Torque: 175 Nm
  • Battery Type: Lithium-ion
  • Vibration – Fastening Bolt: 12.5 m/sec²
  • Vibration K factor: 1.5 m/sec²
  • Noise sound pressure: 96 dB(A)
  • Noise sound power: 107 dB(A)
  • Noise K factor: 3 dB(A)
  • Impact Selection: 3 stage + Tek mode
  • Driving Shank: 6.35mm (1/4″) Hex
  • Blows per Minute (Hi) – ipm: 0 – 3800 ipm
  • Blows per Minute (Med) – ipm: 0 – 2600 ipm
  • Blows per Minute (Lo) – ipm: 0 – 1100 ipm
  • Machine Screw: M4-M8
  • No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm

Additional Information

Promotional Image No
Voltage 18V
Delivery Order by 5PM to get delivered next working day
Weight 0.0000
Size No
Pack Size No
Motor Type Brushless
  • The DTD154 brushless impact driver features high operation efficiency with a 175Nm max torque, 4 pole motor, keyless single sleeve ¼” hex chuck, accepting M5 – M14 standard bolts, M4 – M8 machine screws making it ideal for repetitive screwdriving.
  • The impact driver has a no-load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into the hardwood.
  • It features a maintenance free brushless motor for increased life, electronic brake, a conveniently located push button for forward and reverse and an LED job light with preglow for use in low visibility applications.
  • The compact & lightweight 1.5kg design of the DTD154 makes transportation around the worksite easy without compromising on power, whilst the redesigned belt clip and ergonomic soft grip handle provides maximum user comfort reducing fatigue on prolonged use, providing greater tool control.
  • The Makita DTD154Z is supplied as a tool only unit and has no batteries, charger or case making it the ideal way to build up an existing Makita 18V kit. Batteries and charger are available separately.