Sale!

Makita HM1213C 110V AVT SDS Max Demolition Hammer Drill

56,294.56

The Makita HM1213C is a highly durable demolition hammer with AVT (Anti Vibration Technology) very very low vibration performance. The vibration absorbing grip and active dynamic vibration absorber see to this.

In stock

Description

Makita HM1213C 110V AVT SDS Max Demolition Hammer Drill

Makita HM1213C is one of the market’s largest manufacturers of skilled power tools. There are a variety of sizes and styles that you can purchase. A demolition hammer is not just meant to use on walls but can be used on any material that is thick, bulky and solid.

The higher the number of joules the greater the force created by the demolition hammer. Whether you want to cut out a narrow slot or you need to open a concrete floor, it makes a pretty big difference, you see.

The SDS bits slide into the chuck and heighten the tool’s hammering action. SDS drills (and bits) appear to be much better at getting through the hard things. A hammer drill directly exerts a greater force in the bit, as it hits the drilled material. Demolition hammer can’t drill because the bit doesn’t spin, allowing the machine to concentrate on cracking, chipping and chiseling concrete

  • One-touch sliding chuck for easy bit installation and removal.
  • The LED lamp indicates when to replace the carbon brush.
  • Double Insulation
  • Variable speed
  • Constant speed under load
  • Soft start
  • Anti-vibration handle.
  • Net Weight 9.9kg
  • Suppression of motor speed during no-load reduces the vibration of the tool body.
  • High durability

SPECIFICATION

  • Impact energy: 18.6 J
  • Blows per minute: 950 – 1900 bpm
  • Input wattage: 1500 W
  • Speed Control Variable by Dial: Yes
  • Bit Angle Setting: 12 Stage
  • Vibration: Chiselling: 7 m/sec²
  • Vibration K factor: 1.5 m/sec²
  • Noise sound pressure: 75 dB(A)
  • Noise sound power: 95 dB(A)
  • Noise K factor: 2.53 dB(A)
  • D shaped side handle swivels 360° to your desired position
  • Easy to operate slide switch
  • Rubberized soft grip provides more comfort and control
  • Large carbon brush for extended life
  • 12 Stage bit angle settings
  • Anti-vibration handle
  • One-touch sliding chuck for easy bit changes
  • Variable speed trigger + variable speed control dial
  • Constant speed under load
  • Soft start for suppressing start-up reaction
  • LED service light indicates when to replace carbon brush
  • LED power light indicates a problem with an electric circuit
  • Tri-Axial system – determining the vibration figure of the X, Y and Z axes – all vibration figures conform to EN60745

Additional Information

Promotional Image No
Voltage 110V
Delivery Order by 5 PM to get delivered next working day
Weight 0.0000
Size No
Pack Size No
Motor Type Brushed