Makita DJR360ZK 36V LXT Reciprocating Brushless Saw powered by two 18V Li-ion batteries. Makita‘s brushless motor delivers 0-3,000 strokes per minute combined with a stroke length of 20 mm for quicker and more efficient cutting. Also conveniently located with the electronic 2-speed controls, blade speed is controlled through the variable trigger on the soft-grip handle.
The switching button on the tool handle & Paddle switch on the tool body makes it easier to operate at any grip spot, allowing versatile use of any trigger. Twin switches are designed for the most comfortable grip, and the work area is lit by an LED light.
- Powered by two 18V series Li-ion batteries to supply power to the powerful 36V DC motor drive system.
- The compact and lightweight design.
- Ideal for working in tight spaces.
- Two switch levers with variable speed control.
- Easy, safe operation in any grip position, fully versatile reciprocating saws using either trigger.
Adjust Angles to Quick Cut:
When cutting through thick material, periodically change the angle of the blade. It reduces the surface area being cut, which reduces the friction and makes for a faster cut. And whenever possible, keep the shoe tight up against the cutting surface to avoid kickbacks and to keep the material from rattling around.
Avoid Waggle—Use Smaller Blades
Blades for reciprocating saws come in different lengths for a reason. Cutting smaller material with longer blades can cause the end of the blade to violently waggle back and forth. This can result in a slower cut, a whole lot of vibration and possibly a bent blade. So choose a blade only a couple of inches longer than whatever you’re cutting.
Extend Blade Life with Lubrication
Blades heat up as you cut, especially when you’re cutting metal, and a hot blade dulls quickly. If you have a lot of metal to slice, rub on blade lubricant between cuts. Blade lubricant helps keep the blades cooler and the teeth free of clogs from metal chips.
Cut Plastic with Dull Blades
In some cases a dull blade is preferable: Cutting plastic pipe with a sharp, aggressive blade can cause the teeth to grab the pipe and jerk it back and forth instead of cutting it. A dull wood blade cuts through plastic almost as well as a blade specifically designed for the task.
Safety tips:
- Make it a point to clear all the clutter from your work area before you start work.
- Longer blades are more versatile, so reciprocating saws aren’t fantastic at that. A shorter blade will give you a straighter cut and you’re not going to have to do wiggle or flex.
- Hold the handles clean of dirt and grease. Make sure the blades are fairly sharp for the job.
- When the reciprocating saw cleans or changes blades, turn off the power supply and unplug the saw. Never leave the tool unsupervised.
- Never use a reciprocating saw in an area where fuel materials are stored. Sparks emitted by the tool can cause a fire very quickly.
- Never reach around or beneath the material you cut. You can get yourself seriously injured. Always keep both hands on the saw when running.