Sale!

Makita HR4013C 240V SDS Max Rotary Hammer With AVT 8.0 Joules

58,218.83

The new version of the popular 40 mm AVT rotary hammer drill from Makita provides a significant 25 percent increase in impact strength with an even greater vibration rate reduction of 30 percent. The dynamic vibration absorber has also been improved and the larger damper spring cuts the reaction force when the drill bit hits the substrate.

In stock

Description

Makita HR4013C 240V SDS Max Rotary Hammer With AVT 8.0 Joules

Makita  HR4013C  has a powerful 1,510 W motor delivering 20 J of impact energy. For a unit of this size and weight, SDS Max rotary hammer drill with extremely low vibration rates. Makita AVT system supplied. SDS Max rotary hammer drill with remarkably low vibration levels for such a tool of this size and weight. Compatible with the AVT system.

Anti-vibration technology ensures extra-low vibration efficiency, while the active dynamic vibration absorber in the crank room and barrel room changes air pressure. The absorbing grip vibration is spring-charged with a hinge. The damper springs in the handle separate the handle from the body of the machine, reducing the vibration even further.

The improvement in output-rpm blows per minute and Joules-also combine to produce a 20 percent rise in drilling output with a 32 mm bit and an improvement of 45 percent in the capacity of chipping bull points.

The damper springs in the handle separate the handle from the machine body, further reducing the vibration. The HM0871C has extremely low vibration, features: AVT, Anti-Vibration Technology.  There are a variety of sizes and styles that you can purchase. The dynamic vibration absorber has also been improved and the larger damper spring cuts the reaction force when the drill bit hits the substrate.

  • Soft start for suppression start-up reaction.
  • Noise K factor – 3 dB(A)

 

 

 

Specification

Impact energy – 8.0 J
Max in concrete – 40mm
Impacts per minute – 1450 – 2900ipm
Input Wattage – 1000w
Vibration K factor – 1.5 m/sec²
No Load Speed – 250 – 500 rpm
Vibration: Chiselling – 4.5 m/sec²
Vibration: Hammer Drilling – 5 m/sec²

  • One-touch sliding chuck for easy bit installation and removal
  • Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage
  • “Soft no-load” function automatically reduces the motor speed during idling to suppress the vibration of the machine body
  • Unrivaled low level of vibration aided by vibration-absorbing housing
  • LED service light indicates when to replace carbon brush
    In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications

Additional Information

Promotional Image No
Voltage 240V
Delivery Order by 5PM to get delivered next working day
Weight 0.0000
Size No
Pack Size No
Motor Type Brushed